User guide
Table Of Contents
- Contents
- Printer Features
- Network Basics
- Printing Basics
- Print Quality
- Controlling the Quality of Your Prints
- Solving Print-Quality Problems
- Light Lines or Streaks in One Color
- Dark Lines, Smudges, or Streaks Through All Colors
- Repeating Defects
- Colors Align Incorrectly
- Incomplete Fusing
- Image Is Offset
- Solid Fills Appear Mottled or Blotchy, Blacks Appear Blue
- Poor Transparency Print Quality
- All Colors Are Too Light or Too Dark
- Grays Are Not Neutral
- Colors Vary Between Computers
- Colors Do Not Match
- Printed Colors Do Not Match Monitor Colors
- PANTONE Colors Do Not Match
- Color Settings Not Applied
- Print Area Is Not Centered on the Paper
- Maintenance
- Troubleshooting
- User Safety
- Index
Loading Paper
Phaser® 7760 Color Laser Printer
3-9
Loading Paper
This section includes:
■ Loading Paper in Tray 1 (MPT) on page 3-9
■ Using Manual Feed in Tray 1 (MPT) on page 3-16
■ Loading Paper in Trays 2–5 on page 3-17
Note: Most paper sizes can be loaded in the trays either long-edge feed or short-edge feed,
however, printing long-edge feed is recommended to optimize the life of the printer, supplies,
and print speed.
Loading Paper in Tray 1 (MPT)
Use Tray 1 (MPT) the following paper types:
■ Plain, Colored, Preprinted, and Prepunched paper: 75–90 g/m
2
(20–24 lb. Bond)
■ Heavy plain paper, letterhead: 91–105 g/m
2
(25–28 lb. Bond)
■ Thin card stock: 106–169 g/m
2
(50–60 lb. Cover)
■ Thick card stock: 170–220 g/m
2
(65–80 lb. Cover)
■ Extra thick card stock: 221–255 g/m
2
(81–90 lb. Cover)
■ Thin glossy paper: 120–169 g/m
2
(50–60 lb. Cover)
■ Thick glossy paper: 170–220 g/m
2
(65–80 lb. Cover)
■ Envelopes
■ Labels
■ Xerox Digital Color Clear Transparency
■ Custom size paper, including banner
See also:
Paper Sizes and Weights for Tray 1 (MPT) on page 3-6
Note: If you change the paper in Tray 1 (MPT), select the correct paper type and size on the
control panel.