User guide
Table Of Contents
- Contents
- Printer Features
- Network Basics
- Printing Basics
- Print Quality
- Controlling the Quality of Your Prints
- Solving Print-Quality Problems
- Light Lines or Streaks in One Color
- Dark Lines, Smudges, or Streaks Through All Colors
- Repeating Defects
- Colors Align Incorrectly
- Incomplete Fusing
- Image Is Offset
- Solid Fills Appear Mottled or Blotchy, Blacks Appear Blue
- Poor Transparency Print Quality
- All Colors Are Too Light or Too Dark
- Grays Are Not Neutral
- Colors Vary Between Computers
- Colors Do Not Match
- Printed Colors Do Not Match Monitor Colors
- PANTONE Colors Do Not Match
- Color Settings Not Applied
- Print Area Is Not Centered on the Paper
- Maintenance
- Troubleshooting
- User Safety
- Index
Index
Phaer® 7760 Color Laser Printer
Index-5
supported for Tray 1 (MPT), 3-6, 3-8
supported sizes and weights, 3-5
transparencies, 3-33
types, 3-3
types supported by the stapler, 3-50
unacceptable media types, 3-4
usage guidelines, 3-3
paper jams
clearing, 6-2
door (letter), 6-14
door Tray 2, 6-9
door Tray 3, 4, or 5, 6-11
duplex entrance, 6-3
duplex unit, 6-5
finisher saddle stapler, 6-17
finisher top output tray, 6-17
finisher, area 2, 6-18
finisher, area 3, 6-19
finisher, area 4, 6-20
fuser, 6-3
in the finisher, 6-17
in the printer, 6-2
misfeed at Tray 1 (MPT), 6-7
misfeed at Tray 2, 6-9, 6-11
preventing, 6-2
Tray 1 (MPT), 6-7
PCL, 2-9
fonts, 1-6
PhaserCal software, 1-8
PhaserMatch software, 1-8
PhaserSMART, 1-13
technical support, 1-13, 6-24
photo print-quality mode, 4-2
PostScript, 2-9
fonts, 1-6
preparing the printer for shipment, 5-16
pre-printed paper, 3-9
Press Match, 4-3
TekColor, 4-3
print
adjusting color, 4-3
image is offset, 4-11, 4-12
print job
selecting a print-quality mode, 4-2
print quality
modes, 4-2
solving problems, 4-5
print speed
maximum, 1-6
printer
advanced features, 1-7
available configurations, 1-7
caution symbols, A-6
changing or modifying the IP address
using CentreWare IS, 2-6
configurations, 1-7
connection, 1-6
control panel features, 1-9
drivers, 2-9
fonts, 1-6
information resources, 1-13
location guidelines, A-3
maximum print speed, 1-6
maximum resolution (dpi), 1-6
moving within the office, 5-16
options, 1-7
paper jams, 6-2
precautions for moving, 5-16
preparing for shipment, 5-16
printed colors are incorrect, 4-15
registration, 6-24
safety clearances, A-3
selecting hole punching from the printer
driver, 3-52
setting the IP address, 2-5
standard features, 1-6
supplies, A-4
trays, 1-6
views, 1-2, 1-3, 1-4, 1-5
printer driver
available, 2-9
controlling print quality, 4-2
installing, 2-9
Layout tab, 3-25
Macintosh OS 9.x, 2-11
Macintosh OS X version 10.2 and
10.3, 2-12
Macintosh OS X version 10.4, 2-14
operating systems, 2-9
Output Options tab, 3-25
page description languages, 2-9
Paper/Quality tab, 3-25
PCL, 2-9
PostScript, 2-9
PostScript driver settings
(Macintosh), 3-27
selecting hole punching, 3-52
selecting stapling, 3-51