User guide
Table Of Contents
- Contents
- Printer Features
- Network Basics
- Printing Basics
- Print Quality
- Controlling the Quality of Your Prints
- Solving Print-Quality Problems
- Light Lines or Streaks in One Color
- Dark Lines, Smudges, or Streaks Through All Colors
- Repeating Defects
- Colors Align Incorrectly
- Incomplete Fusing
- Image Is Offset
- Solid Fills Appear Mottled or Blotchy, Blacks Appear Blue
- Poor Transparency Print Quality
- All Colors Are Too Light or Too Dark
- Grays Are Not Neutral
- Colors Vary Between Computers
- Colors Do Not Match
- Printed Colors Do Not Match Monitor Colors
- PANTONE Colors Do Not Match
- Color Settings Not Applied
- Print Area Is Not Centered on the Paper
- Maintenance
- Troubleshooting
- User Safety
- Index
Index
Phaer® 7760 Color Laser Printer
Index-2
messages, 6-23
printing sample pages, 1-11
custom size paper, 3-45
single-sided printing, 3-45
supported for Tray 1 (MPT), 3-6, 3-8,
3-45
supported for Trays 2-n, 3-45
custom size printing
2-sided printing, 3-45
D
dark lines in all colors, 4-7
dark lines in one color, 4-6
database
local Domain Name Service (DNS) name
space, 2-7
default router/gateway address, 2-6
DHCP
enable for Dynamic Domain Name
Service (DDNS), 2-7
enabled by default on Phaser printers, 2-6
manually setting the printer’s IP
address, 2-8
setting the printer’s IP address
dynamically, 2-6
Domain Name Service (DNS)
local domain name space database, 2-7
using host names, 2-7
drivers
available, 2-9
description, 2-9
installing, 2-9
Macintosh OS 9.x, 2-11
Macintosh OS X version 10.2 and
10.3, 2-12
Macintosh OS X version 10.4, 2-14
PCL, 2-9
PostScript, 2-9
selecting 2-sided printing, 3-31
selecting hole punching, 3-52
selecting stapling, 3-51
setting the default output tray, 3-48
UNIX, 2-9
Windows 2000 or later, 2-10
Windows 98 SE or later, 2-10
Xerox Support Centre, 1-14
duplex entrance
paper jam, 6-3
duplex unit
paper jam, 6-5
Dynamic Domain Name Service
(DDNS), 2-7
dynamically setting the printer’s IP
address, 2-6
E
electrical safety, A-1
emptying the waste punch box, 5-12
enhanced print-quality mode, 4-2
envelopes, 3-36
guidelines, 3-36
printing from Tray 1 (MPT), 3-37
error and warning messages, 6-23
Ethernet connection, 2-4
F
features
printer configurations, 1-7
standard, 1-6
feed roller kit
ordering supplies, 5-14
finisher
door paper jam, 6-18, 6-20, 6-21
hole puncher, 3-51
paper jam, 6-17
saddle stapler paper jam, 6-17
stapler, 3-50
stapler paper jam, 6-17
upper output tray paper jam, 6-22
format
IP address, 2-6
fuser
ordering supplies, 5-14
fusing
incomplete, 4-10
G
getting help, 6-23
PhaserSMART, 6-24
PrintingScout Alerts, 6-23
technical support, 1-13
web links, 6-24
glossy paper, 3-40
printing from Tray 1 (MPT), 3-41
printing guidelines, 3-40