User guide
Table Of Contents
- Contents
- Printer Features
- Network Basics
- Printing Basics
- Print Quality
- Controlling the Quality of Your Prints
- Solving Print-Quality Problems
- Light Lines or Streaks in One Color
- Dark Lines, Smudges, or Streaks Through All Colors
- Repeating Defects
- Colors Align Incorrectly
- Incomplete Fusing
- Image Is Offset
- Solid Fills Appear Mottled or Blotchy, Blacks Appear Blue
- Poor Transparency Print Quality
- All Colors Are Too Light or Too Dark
- Grays Are Not Neutral
- Colors Vary Between Computers
- Colors Do Not Match
- Printed Colors Do Not Match Monitor Colors
- PANTONE Colors Do Not Match
- Color Settings Not Applied
- Print Area Is Not Centered on the Paper
- Maintenance
- Troubleshooting
- User Safety
- Index
Clearing Paper Jams
Phaser® 7760 Color Laser Printer
6-19
Jam at the Finisher - Area 3
Follow these steps to clear the jam.
1. Open the finisher door.
2. Open handle 3 by pulling it down.
3. Pull the jammed paper out of the finisher. Confirm that all paper fragments are removed.
4. Close handle 3.
5. Close the finisher door.
7760-075
7760-170
3
7760-003