User guide
Table Of Contents
- Contents
- Printer Features
- Network Basics
- Printing Basics
- Print Quality
- Controlling the Quality of Your Prints
- Solving Print-Quality Problems
- Light Lines or Streaks in One Color
- Dark Lines, Smudges, or Streaks Through All Colors
- Repeating Defects
- Colors Align Incorrectly
- Incomplete Fusing
- Image Is Offset
- Solid Fills Appear Mottled or Blotchy, Blacks Appear Blue
- Poor Transparency Print Quality
- All Colors Are Too Light or Too Dark
- Grays Are Not Neutral
- Colors Vary Between Computers
- Colors Do Not Match
- Printed Colors Do Not Match Monitor Colors
- PANTONE Colors Do Not Match
- Color Settings Not Applied
- Print Area Is Not Centered on the Paper
- Maintenance
- Troubleshooting
- User Safety
- Index
Clearing Paper Jams
Phaser® 7760 Color Laser Printer
6-2
Clearing Paper Jams
This section includes:
■ Preventing Jams on page 6-2
■ Jams in the Printer on page 6-2
■ Jams in the Finisher on page 6-17
Preventing Jams
To reduce the frequency of paper jams, follow the guidelines and instructions in Printing
Basics which includes information about supported paper and other media, guidelines for
paper and media usage, and instructions for properly loading paper and media in the trays. Do
not overload the paper trays.
Jams in the Printer
This section includes:
■ Jam at the Fuser on page 6-3
■ Jam at the Duplex Unit on page 6-5
■ Jam at Tray 1 (MPT) on page 6-7
■ Jam at Tray 2 on page 6-9
■ Jam at Tray 3, 4, or 5 on page 6-11
■ Jam at Left Door (A, B, or C) on page 6-14