User guide
Table Of Contents
- Contents
- Printer Features
- Network Basics
- Printing Basics
- Print Quality
- Controlling the Quality of Your Prints
- Solving Print-Quality Problems
- Light Lines or Streaks in One Color
- Dark Lines, Smudges, or Streaks Through All Colors
- Repeating Defects
- Colors Align Incorrectly
- Incomplete Fusing
- Image Is Offset
- Solid Fills Appear Mottled or Blotchy, Blacks Appear Blue
- Poor Transparency Print Quality
- All Colors Are Too Light or Too Dark
- Grays Are Not Neutral
- Colors Vary Between Computers
- Colors Do Not Match
- Printed Colors Do Not Match Monitor Colors
- PANTONE Colors Do Not Match
- Color Settings Not Applied
- Print Area Is Not Centered on the Paper
- Maintenance
- Troubleshooting
- User Safety
- Index
Ordering Supplies
Phaser® 7760 Color Laser Printer
5-14
Ordering Supplies
This section includes:
■ Consumables on page 5-14
■ Routine Maintenance Items on page 5-14
■ When to Order Supplies on page 5-14
■ Recycling Supplies on page 5-15
Certain consumables and routine maintenance items need to be ordered occasionally. Each
item includes installation instructions in the package.
Consumables
■ Toner Cartridges (Cyan, Magenta, Yellow, Black)
■ Staple Pack (if the optional finisher is installed)
Routine Maintenance Items
■ Imaging Units (Cyan, Magenta, Yellow, Black)
■ Fuser
■ Transfer Roller
■ Accumulator Belt
■ Belt Cleaner Assembly
■ Waste Cartridge
■ Feed Roller Kit
When to Order Supplies
The control panel displays a warning when the supply nears its replacement time. Verify that
you have replacements on hand. It is important to order these supplies when the messages first
appear to avoid interruptions to your printing. The control panel displays an error message
when the supply must be replaced.
To view the current status of your printer supplies, print the Supplies Usage page:
1. On the control panel, select
Information, and then press the OK button.
2. Select
Supplies Info, and then press the OK button.
3. Select
Supplies Usage Page to print.