User guide
Table Of Contents
- Contents
- Printer Features
- Network Basics
- Printing Basics
- Print Quality
- Controlling the Quality of Your Prints
- Solving Print-Quality Problems
- Light Lines or Streaks in One Color
- Dark Lines, Smudges, or Streaks Through All Colors
- Repeating Defects
- Colors Align Incorrectly
- Incomplete Fusing
- Image Is Offset
- Solid Fills Appear Mottled or Blotchy, Blacks Appear Blue
- Poor Transparency Print Quality
- All Colors Are Too Light or Too Dark
- Grays Are Not Neutral
- Colors Vary Between Computers
- Colors Do Not Match
- Printed Colors Do Not Match Monitor Colors
- PANTONE Colors Do Not Match
- Color Settings Not Applied
- Print Area Is Not Centered on the Paper
- Maintenance
- Troubleshooting
- User Safety
- Index
Adding Staples
Phaser® 7760 Color Laser Printer
5-6
Adding Staples
This section includes:
■ Adding Staples to the Regular Stapler on page 5-6
■ Adding Staples to the Booklet Stapler on page 5-9
Note: The staple cartridges used in the booklet stapler are different from the staple cartridges
used in the regular stapler.
Adding Staples to the Regular Stapler
When the control panel displays a message that staple cartridge R1 needs to be replaced,
follow these steps.
1. Open the finisher door.
2. Pull the staple unit to the front of the finisher.
7760-075
7760-076