Instruction Manual

155
File Destination / Output Destination FP11
Received Fax documents will be routed to the output tray or Mailbox specified by these settings.
1. Press the Log In / Out button to enter System Administration Mode.
2. On the keypad enter [11111] or current password. Touch Confirm when finished.
3. Touch System Settings.
4. Touch System Settings, again.
5. Touch Fax Mode Settings.
6. Select File Destination/Output Destination.
7. Select the Box Selector – Line Setup button.
8. Touch Change Settings.
9. Make the appropriate selections and touch Save when done.
Note: If Box Selector is selected as an Output Destination, when On is selected, you will have to
enter a mailbox number, then touch Save.
10. When complete, touch Close until the System Settings screen (with an Exit button) is displayed.
11. Touch Exit to exit the System Settings screen.