User's Manual

1. At your computer, open a Web browser. In the address field, type the IP address of the printer,
then press Enter or Return.
2. In the Embedded Web Server, log in as a system administrator. For details, refer to Logging In as
the Administrator at the Control Panel.
3. Click System→Security.
4. For Network Security, click SSL/TLS Settings.
5. Select one or more protocols from the list of SSL and TLS protocols.
6. To select a Device Certificate for the server, click in the Device Certificate - Server area, then select
a certificate from the list.
7. To enable SSL communication, click the HTTP - SSL/TLS Communication toggle button.
8. For HTTP - SSL/TLS Port Number, type a valid port number.
Caution: Before changing the default value of 443, contact your system administrator.
9. If your LDAP server requires SSL communication using LDAP authentication, click the LDAP - SSL/
TLS Communication toggle button.
10. To enable SSL communication for SMTP, click SMTP - SSL/TLS Communication, then select an
option.
11. If necessary for your environment, click the Verify Remote Server Certificate toggle button, then
click OK.
12. To activate your changes, at the prompt, click Restart Now.
Note: A check mark on the toggle button indicates that the setting is enabled.
EEnnaabblliinngg HHTTTTPPSS UUssiinngg tthhee EEmmbbeeddddeedd WWeebb SSeerrvveerr
1. At your computer, open a Web browser. In the address field, type the IP address of the printer,
then press Enter or Return.
2. In the Embedded Web Server, log in as a system administrator. For details, refer to Accessing the
Embedded Web Server as a System Administrator.
3. Click Connectivity→HTTP.
4. To enable HTTPS, click the HTTPS (SSL) toggle button.
Note: A check mark on the toggle button indicates that the setting is enabled.
5. Click OK.
6. To activate your changes, at the prompt, click Restart Now.
CCoonnffiigguurriinngg SSMMTTPP DDoommaaiinn FFiilltteerriinngg
1. At your computer, open a Web browser. In the address field, type the IP address of the printer,
then press Enter or Return.
2. In the Embedded Web Server, log in as a system administrator. For details, refer to Logging In as
the Administrator at the Control Panel.
3. In the Embedded Web Server, click System→Security.
284
Xerox
®
WorkCentre
®
6515 Multifunction Printer
User Guide
System Administrator Functions