User's Manual

OOppeenniinngg tthhee SSeeccuurriittyy MMeennuu
1. At your computer, open a Web browser. In the address field, type the IP address of the printer,
then press Enter or Return.
2. In the Embedded Web Server, log in as a system administrator. For details, refer to Logging In as
the Administrator at the Control Panel.
3. Click System→Security.
AAcccceessssiinngg tthhee AAddvvaanncceedd SSeeccuurriittyy SSeettttiinnggss
1. At your computer, open a Web browser. In the address field, type the IP address of the printer,
then press Enter or Return.
2. In the Embedded Web Server, log in as a system administrator. For details, refer to Logging In as
the Administrator at the Control Panel.
3. Click Permissions, then click Login/Logout Settings.
4. For Advanced Settings, click Edit.
CCoonnffiigguurriinngg tthhee AAddvvaanncceedd SSeeccuurriittyy SSeettttiinnggss
To configure the log in security settings:
1. In the Embedded Web Server, access the Advanced Security Menu. For details, refer to
Configuring the Advanced Security Settings.
2. To set the case sensitivity for the user name input, click Case Sensitive User Name, click either
Case Sensitive or Not Case Sensitive, then click OK.
3. To configure logging of failed login attempts, click Log Failed Login Attempts.
a. To enable logging for failed login attempts, click the Log Failed Login Attempts toggle
button.
b. To set the maximum number of failed login attempts allowed within a specific time period, in
the Failed Login Attempt Limit field, type a number.
c. Click OK.
4. To configure limits for administrator login attempts, click Limit Login Attempts of System
Administrator.
a. To limit the administrator login attempts, click the Limit Login Attempts of System
Administrator toggle button.
b. To set the maximum number of failed login attempts allowed before the administrator login
is disabled, in the Failed Login Attempt Limit field, type a number.
Note: This setting is available only if more than one user is a member of the System
Administrator device role.
5. Click OK.
To configure more advanced security settings:
Xerox
®
WorkCentre
®
6515 Multifunction Printer
User Guide
277
System Administrator Functions