User's Manual

Table Of Contents
9. If your email server requires encryption but does not offer a STARTTLS command to the printer,
perform the following steps:
a. In the Outgoing SMTP Authentication area, click SMTP Authentication, then select SMTP
AUTH.
b. In the SMTP AUTH User Name field, enter the user name or email address for the server.
c. Type the password for the email address, then retype the password.
10. To save the settings, click OK.
SSeettttiinngg UUpp SSccaannnniinngg ttoo aa SShhaarreedd WWiinnddoowwss FFoollddeerr
UUssiinngg SSMMBB
You can use the Scan To App to scan to a folder on your Windows PC using the Address Book.
Before you begin:
From a configuration report, obtain the IP address of the printer. For details, refer to Printing the
Configuration Report.
Ensure that HTTPS is enabled. For details, refer to Enabling HTTPS Using the Embedded Web
Server.
Ensure that the primary network is configured for the network type for your device. For details,
refer to Configuring the Primary Network at the Control Panel.
Locate and record the IP address and host name of your PC. For details, refer to Obtaining the IP
Address and Host Name of your Windows Computer.
On your PC, disable the Sharing Wizard. For details, refer to Disabling the Sharing Wizard on Your
Windows Computer.
On your PC, set up a shared folder as a repository for your scanned images.
To configure scanning to a folder on your desktop using the Address Book:
1. In the Embedded Web Server, click Address BookAdd Contact.
2. Type the first name and last name of the new contact.
3. If necessary, type the company name of the new contact.
4. For Network (SMB), click the Plus icon (+), then enter the following information:
Nickname: Enter the name that you want to appear in the Address Book.
Type: Select the network connection type.
Note: It is recommended that you select Host Name as the connection type. If
the IP address changes, a connection to the server is maintained typically through
the host name.
IP Address/Host Name: Port: Based on the network type selected, in the first field, enter the
IP address or host name of your PC. In the second field, enter the default port number.
5. In the Share field, enter the name of the shared folder to use as the repository for your scanned
images.
6. In the Login Name field, enter your PC user name.
7. In the Password field, type your PC password, then retype the password.
Xerox
®
WorkCentre
®
6515 Multifunction Printer
User Guide
265
System Administrator Functions