User's Manual

5. For FTP, click the Plus icon (+), then enter the following information:
• Nickname: Enter the name that you want to appear in the Address Book.
• Type: Select the network connection type.
• IP Address/Host Name: Port: Enter the IP address or host name of your FTP server, then enter
the default port number. In the next field, enter the default port number for FTP, 21, or select
a number from the range provided.
• Document Path: Enter the path of the folder on the SMB server. For example, to save the
scanned files to a folder named colorscans inside the scans folder, type colorscans.
• Login Name: Enter your computer user name.
• Password: Enter your computer login password.
• Retype Password: Enter your login password again.
6. To save your network information, click OK.
7. To save your contact, click OK.
8. Now you can scan to the FTP server.
SSeettttiinngg UUpp SSccaannnniinngg ttoo aann SSFFTTPP SSeerrvveerr
Before you set up scanning to an SFTP Server, ensure that the server has the proper software installed
and configured.
1. In the Embedded Web Server, log in as administrator. For details, refer to Accessing the
Embedded Web Server as a System Administrator.
2. Click Address Book.
3. To associate the SFTP server with a contact, click a contact name.
4. For SFTP, click the Plus icon (+), then enter the following information:
• Nickname: Enter the name that you want to appear in the Address Book.
• Type: Select the network connection type.
• IP Address/Host Name: Port: Enter the IP address or host name of your SFTP server, then
enter the default port number. In the next field, enter the default port number for SFTP. Use
the default port number 22, or select a number from the range provided.
• Document Path: Enter the path of the folder on the SFTP server. For example, to save the
scanned files to a folder named colorscans inside the scans folder, type scans/
colorscans.
• Login Name: Enter a user name corresponding to a user account on the SFTP server.
• Password: Enter the password corresponding to the user account on the SFTP server.
• Retype Password: Enter your login password again.
Note: After you complete the process, scanning to the SFTP server is enabled.
5. Click OK.
Xerox
®
WorkCentre
®
6515 Multifunction Printer
User Guide
261
System Administrator Functions