User's Manual

SSeettttiinngg tthhee MMeeaassuurreemmeenntt UUnniittss
1. At the printer control panel, press the Home button.
2. Touch Device→General→Measurements.
3. To select an option for units, touch Units, then touch Millimeters or Inches.
4. To set the units for the custom paper size, touch Paper Size Preference, then touch Inch or
Metric.
5. Touch OK.
6. To return to the Home screen, press the Home button.
SSeettttiinngg tthhee DDiissppllaayy BBrriigghhttnneessss
1. At the printer control panel, press the Home button.
2. Touch Device→General→Display Brightness.
3. To adjust the brightness, move the slider to the right to increase the brightness or to the left to
reduce the brightness.
4. To return to the Home screen, press the Home button.
SSeettttiinngg tthhee SSoouunnddss aatt tthhee CCoonnttrrooll PPaanneell
1. At the printer control panel, press the Home button.
2. Touch Device→General→Sounds.
3. Touch Enable Sounds.
4. Touch a required event. To lower the volume, move the slider left, or to increase the volume, move
the slider to the right.
5. Repeat step 4 for each tone that you want to set.
6. To save the setting, touch OK.
7. To return to the Home screen, press the Home button.
CCoonnffiigguurriinngg LLooww SSuupppplliieess AAlleerrtt MMeessssaaggeess
1. At the printer control panel, press the Home button.
2. Touch Device→Supplies→Alerts Setup.
3. Touch Alerts Setup.
4. To specify the level of toner remaining that triggers a toner low alert, touch Toner Level, then
select a percentage.
5. To set toner low alerts, select an option.
• To display an alert message when the toner is low, touch the Toner Low toggle button.
• To display an alert message when the toner is empty, touch the Toner Empty toggle button.
6. To specify the percentage of life remaining that triggers a Drum Cartridge alert, touch Drum
Cartridge Level, then select a percentage.
250
Xerox
®
WorkCentre
®
6515 Multifunction Printer
User Guide
System Administrator Functions