User's Manual

3. On the Home page, for Supplies, click Details.
4. For Options, click Alerts Setup.
5. To enable alerts, for Enable Alerts, click the toggle button.
Note: A check mark on the toggle button indicates that the setting is enabled.
6. To enable or disable an alert, for the alert type, select the appropriate option:
• Click the toggle button.
• Click the alert type, then select an option from the list.
7. Click OK.
CCoonnffiigguurriinngg EEmmaaiill AAlleerrttss
Note: Before configuring email alerts, configure the printer to communicate with your SMTP
email server. For details, refer to Configuring SMTP Domain Filtering.
1. At your computer, open a Web browser. In the address field, type the IP address of the printer,
then press Enter or Return.
2. In the Embedded Web Server, log in as a system administrator. For details, refer to Logging In as
the Administrator at the Control Panel.
3. On the Home page, for Supplies, click Details.
4. For Options, click Email Alerts.
5. For Email Alerts, type the email address for the recipient.
Note: A check mark on the toggle button indicates that the setting is enabled.
6. To enable or disable an email alert, for the alert type, click the toggle button.
7. Click OK.
CCoonnffiigguurriinngg PPDDLL SSeettttiinnggss ffrroomm tthhee EEmmbbeeddddeedd WWeebb
SSeerrvveerr
You can configure settings for the following PDL protocols:
• PCL
®
6/5e
• PostScript
®
• PDF
Xerox
®
WorkCentre
®
6515 Multifunction Printer
User Guide
245
System Administrator Functions