User's Manual

Copy Settings
You can adjust the settings for your copy job, specify characteristics of the original documents, and
customize the output.
You can also modify the default settings for many options. For details, refer to Modifying the Default
Copy Settings.
SSeelleeccttiinngg CCoolloorr oorr BBllaacckk aanndd WWhhiittee CCooppiieess
If the original document contains color, you can create copies in full color or in black and white.
Note: This setting returns to its default after the copy job is complete. To modify the default
setting, refer to Modifying the Default Copy Settings.
To select color or black and white copying:
1. At the printer control panel, press the Home button.
2. Touch Copy.
3. Touch Output Color.
4. Select an option:
• Auto Detect: The device detects the color content in the original document. If the original is
a color document, the printer makes copies in full color. If the original is a black-and-white
document, the printer makes copies in black only.
• Color: This option copies in full color output using all four printing colors, cyan, magenta,
yellow, and black.
• Black & White: Produces copies in black and white only. Colors in the original are converted to
shades of gray.
SSeettttiinngg 22--SSiiddeedd CCooppyyiinngg
1. At the printer control panel, press the Home button.
2. Touch Copy.
3. Touch 2-Sided.
4. Touch one of the following:
• 1 - 1 Sided
• 1 - 2 Sided
• 2 - 2 Sided
• 2 - 1 Sided
5. To rotate the image on side 2 by 180 degrees, touch More, then touch Rotate Side 2.
6. Touch OK.
SSeelleeccttiinngg aa PPaappeerr TTrraayy
1. At the printer control panel, press the Home button.
2. Touch Copy.
124
Xerox
®
WorkCentre
®
6515 Multifunction Printer
User Guide
Copying