User's Manual

8. To select the sides to scan from the original, click Side to Scan, then select an option.
• 1 Sided Scan: This setting scans only one side of the original document or image and
produces 1-sided output files.
• 2 Sided Scan: This setting scans both sides of the original document or image.
• 2 Sided Scan, Rotate Side 2: This setting scans both sides of the original document or image,
and rotates the second side by 180 degrees.
9. To select the resolution to scan the image, click Resolution, then select an option.
10. To adjust the scan color, click Output Color, then select an option.
• Automatically Detect: This option detects the color content in the original image. If the
original image is color, the printer scans in full color. If the original image is a black and white
document, the printer scans in black only.
• Black and White: This setting scans in black and white only.
• Color: This setting scans in full color.
• Grayscale: This setting detects, then scans various shades of gray.
11. To adjust the scan, click Scan Adjustments.
12. Select a Scan Preset.
13. Click Scan.
The scan resolution depends on how you plan to use the scanned image. Scan resolution affects both
the size and image quality of the scanned image file. Higher scan resolution produces better image
quality and a larger file size.
1. To adjust the scan color, click Output Color, then select an option.
• Automatically Detect: This option detects the color content in the original image. If the
original image is color, the printer scans in full color. If the original image is a black and white
document, the printer scans in black only.
• Black and White: This setting scans in black and white only.
• Color: This setting scans in full color.
• Grayscale: This setting detects, then scans various shades of gray.
2. To adjust the scan, click Scan Adjustments.
3. Select a Scan Preset.
4. Click Scan.
SSccaannnniinngg UUssiinngg tthhee WWiinnddoowwss WWeebb SSeerrvviicceess oonn
DDeevviicceess AApppplliiccaattiioonn
Before you begin:
• On your computer, ensure that the printer is installed using WSD and is available for use on the
network. For details, refer to Installing the Software.
• On your printer, ensure that WSD is enabled. For details, refer to Enabling WSD Scan Services.
1. Load the original document on the document glass or in the duplex automatic document feeder.
2. On your computer, select the Windows Fax and Scan application, then click Run.
3. Click New Scan.
4. To choose the device, click Change. From the list, select your device.
Xerox
®
WorkCentre
®
6515 Multifunction Printer
User Guide
143
Scanning