User's Manual

SSaammppllee SSeett
The Sample Set job type prints one copy of a multiple-copy print job before printing the remaining
copies. After reviewing the sample set, you can either print the remaining copies or delete them at
the printer control panel.
Sample Set is a type of saved job with these features:
• A Sample Set job appears in a folder named after the user ID associated with the print job.
• A Sample Set job does not use a passcode.
• Any user can print or delete a Sample Set job.
• A Sample Set prints one copy of a job to allow you to proofread the job before printing any
remaining copies.
After a Sample Set job is printed, it is deleted automatically.
To print a Sample Set, refer to Printing a Sample Set.
Printing a Sample Set
1. In your software application, access the print settings. For most software applications, press CTRL
+P for Windows or CMD+P for Macintosh.
2. Select your printer, then open the print driver.
• For Windows, click Printer Properties. Depending on your application, the title of the button
varies.
• For Macintosh, in the Print window, click Preview, then select Xerox Features.
3. For Job Type, select Sample Set.
4. Select any other required printing options.
• For Windows, click OK, then click Print.
• For Macintosh, click Print.
Releasing a Sample Set
1. If the control panel is dark, press the Power/Wake button.
2. Press the Print Menu button.
3. Use the arrows to navigate to Sample Set, then press OK.
4. Navigate to your user name, then press OK.
5. Navigate to the desired job, then press OK.
6. If your review of the printed copy is acceptable, print more copies.
• Navigate to Print, then press OK.
• Use the arrows to select the number of copies to print, then press OK.
• At the prompt, press OK.
7. To delete the job without printing more copies, navigate to Delete, then press OK.
8. To return to the Ready screen, press the Print Menu button.
Xerox
®
Phaser
®
6510 Printer
User Guide
95
Printing