User's Manual

environmental impact of your work. However, should you require simplex/1-sided printing, you may
change the print settings in the print driver.
Paper Types
This product can be used to print on both recycled and virgin paper, approved to an environmental
stewardship scheme, which complies with EN12281 or a similar quality standard. Lighter weight
paper (60 g/m²), which contains less raw material and thus saves resources per print, may be used in
certain applications. We encourage you to check if this is suitable for your printing needs.
ENERGY STAR
The ENERGY STAR program is a voluntary scheme to promote the development and purchase of
energy efficient models, which help to reduce environmental impact. Details on the ENERGY STAR
program and models qualified to ENERGY STAR can be found at the following website: www.
energystar.gov
For additional information on energy or other related topics, go to www.xerox.com/environment or
www.xerox.com/environment_europe.
Power Consumption and Activation Time
The amount of electricity that a product consumes depends on the way the device is used. This
product is designed and configured to enable you to reduce your electricity usage.
After the last print, the device switches to Ready mode. In this mode, the device can print again
immediately. If the product is not used for a period of time, the device switches to a Power Saver
mode. In these modes, to enable reduced product power consumption, only essential functions
remain active. The product takes slightly longer to produce the first print after it exits Power Saver
mode than it takes in Ready mode. This delay is the result of the system waking up from Power Saver
mode and is typical of most imaging products on the market.
You can set a longer activation time or completely deactivate the Power Saver mode. This device can
take longer to switch to a lower energy level.
Changing the default Power Saver activation times can result in an overall higher energy consumption
of the product.
To learn more about Xerox participation in sustainability initiatives, go to: www.xerox.com/
environment.
EcoLogo Certified to Office Machines CCD-035
This product is certified to EcoLogo standard for office machines, meeting all
requirements for reduced environmental impact. As part of achieving certification,
Xerox Corporation has proven this product meets the EcoLogo criteria for energy
efficiency. Certified copier, printer, multifunctional device, and fax products must also
meet criteria such as reduced chemical emissions and demonstrate compatibility with
recycled supplies. EcoLogo was established in 1988 to help consumers find products
and services with reduced environmental impacts. EcoLogo is a voluntary, multi-
attribute, and lifecycle-based environmental certification. This certification indicates
that a product has undergone rigorous scientific testing, exhaustive auditing, or both,
to prove its compliance with stringent, third-party, environmental performance
standards.
228
Xerox
®
Phaser
®
6510 Printer
User Guide
Regulatory Information