User's Manual

5. Navigate to Panel Lock, then press OK.
6. Navigate to On, then press OK.
7. At the prompt, enter a numeric passcode, then press OK.
8. At the prompt, reenter the passcode, then press OK.
9. To return the printer to Ready, press Menu.
To change the Panel Lock passcode:
1. At the printer control panel, press the Menubutton.
Note: To navigate through the menu, use the arrow buttons.
2. Navigate to Admin Menu, then press OK.
3. Navigate to System Settings, then press OK.
4. Navigate to Panel Settings, then press OK.
5. Navigate to Change Passcode, then press OK.
6. At the prompt, enter a numeric passcode, then press OK.
7. At the prompt, reenter the passcode, then press OK.
8. To return the printer to Ready, press Menu.
EEnnaabblliinngg HHTTTTPPSS UUssiinngg tthhee EEmmbbeeddddeedd WWeebb SSeerrvveerr
1. At your computer, open a Web browser. In the address field, type the IP address of the printer,
then press Enter or Return.
2. In the Embedded Web Server, log in as a system administrator. For details, refer to Accessing the
Embedded Web Server as a System Administrator.
3. Click Connectivity→HTTP.
4. To enable HTTPS, click the HTTPS (SSL) toggle button.
Note: A check mark on the toggle button indicates that the setting is enabled.
5. Click OK.
6. To activate your changes, at the prompt, click Restart Now.
190
Xerox
®
Phaser
®
6510 Printer
User Guide
System Administrator Functions