User's Manual

5. To use a text string to add to the user name, for Use Added Text String, click the toggle button.
Note: A check mark on the toggle button indicates that the feature is enabled.
6. For Added Text String, enter the text string to add to the user name for authentication.
7. Click OK, then click Close.
CCoonnffiigguurriinngg tthhee NNeettwwoorrkk AAuutthheennttiiccaattiioonn
Network Authentication is a security protocol that requires users to provide their login credentials
before they can access the printer. The printer compares the user credentials to the information
stored on an authentication server.
To prove their identity, users can type their user credentials at the control panel, in the Embedded
Web Server, or they can use a card reader.
To configure access rights using network authentication:
To access the authentication system:
1. At your computer, open a Web browser. In the address field, type the IP address of the printer,
then press Enter or Return.
2. In the Embedded Web Server, log in as a system administrator. For details, refer to Logging In as
the Administrator at the Control Panel.
3. Click Permissions.
4. Click Login/Logout Settings.
5. For Network, click Edit.
6. For Network Login, select LDAP, then click Next.
7. Configure the authentication system. For details, refer to Configuring an LDAP Authentication
System.
CCoonnffiigguurriinngg aann LLDDAAPP AAuutthheennttiiccaattiioonn SSyysstteemm
Before using LDAP servers for authentication, configure the settings in the Embedded Web Server.
To configure an LDAP system:
1. At your computer, open a Web browser. In the address field, type the IP address of the printer,
then press Enter or Return.
2. In the Embedded Web Server, log in as a system administrator. For details, refer to Logging In as
the Administrator at the Control Panel.
3. Click Permissions, then click Login/Logout Settings.
4. For Network, click Edit.
5. In Network Login, select LDAP, then click Next.
6. In LDAP, click each of the topics in the list. In each window, perform the required configuration,
then click OK.
7. When the LDAP configuration is finished, click Done.
188
Xerox
®
Phaser
®
6510 Printer
User Guide
System Administrator Functions