User's Manual

SSeettttiinngg tthhee SSyysstteemm CClloocckk aatt tthhee CCoonnttrrooll PPaanneell
To access the System Clock menu:
1. At the printer control panel, press Menu.
Note: To navigate through the menu, use the arrow buttons.
2. Navigate to Admin Menu, then press OK.
3. Navigate to System Settings, then press OK.
4. Navigate to System Clock, then press OK.
To set the date:
1. From the System Clock menu, navigate to Set Date, then press OK.
2. To set the month, day, and year, use the arrow buttons. When finished, press OK.
3. To return to the System Clock menu, press Back.
4. Navigate to Date Format, then press OK.
5. To select a date format, use the arrow buttons, then press OK.
6. To return to the System Clock menu, press Back.
7. If the date and time are set, to return the printer to Ready, press Menu.
To set the time:
1. From the System Clock menu, navigate to Set Date, then press OK.
2. To set the hour and minutes, use the arrow buttons. When finished, press OK.
3. To return to the System Clock menu, press Back.
4. Navigate to Time Format, then press OK.
5. To select the time format, navigate to 12 Hour Clock or 24 Hour Clock, then press OK.
6. To return to the System Clock menu, press Back.
7. If the date and time are set, to return the printer to Ready, press Menu.
SSeettttiinngg tthhee MMeeaassuurreemmeenntt UUnniittss
1. At the printer control panel, press Menu.
Note: To navigate through the menu, use the arrow buttons.
2. Navigate to Admin Menu, then press OK.
3. Navigate to System Settings, then press OK.
4. Navigate to Paper Size Pref, then press OK.
5. Select Millimeters (mm) or Inches ("), then press OK.
6. To return the printer to Ready, press Menu.
172
Xerox
®
Phaser
®
6510 Printer
User Guide
System Administrator Functions