User's Manual

Disabling Wireless Networking From the Embedded Web Server
Note: Wireless networking is available only on printers with the optional Wireless Network
Adapter installed.
1. In the Embedded Web Server, log in as administrator, then click Connectivity.
2. In the Connections area, click Wi-Fi.
3. Click the Enable toggle button.
4. Click OK.
5. To activate your changes, at the prompt, click Restart Now.
WWii--FFii DDiirreecctt
A Wi-Fi Direct network connection enables devices to connect with each other without requiring a
wireless access point. You can connect to your printer from a Wi-Fi mobile device such as a tablet,
computer, or smart phone.
A Wi-Fi Direct connection does not require manual configuration.
Note:
• Wireless networking is available only on printers that have the optional Wireless Network
Adapter installed.
• The Wi-Fi Direct connection is disabled by default.
To configure Wi-Fi Direct from the Embedded Web Server:
1. In the Embedded Web Server, log in as administrator, then click Connectivity.
2. For Connections, click Wi-Fi Direct.
3. To enable Wi-Fi Direct, click the Enable toggle button.
4. Click Group Role, then select an option from the menu.
• To set the printer to configure the Group Role automatically:
– Select Auto.
– For Device Name, type a name for the printer.
• To set the printer as Group Owner for a Wi-Fi Direct group, similar to a wireless access point:
– Select Group Owner.
– In the Group Owner area, type the information for SSID and Passcode.
5. For DHCP Server:
• Type the IP Address and Subnet Mask.
• For IP Address Lease Time, type the number of minutes.
6. Click OK.
To configure Wi-Fi Direct at the control panel:
1. At the printer control panel, press the Home button.
2. Log in as administrator.
Xerox
®
Phaser
®
6510 Printer
User Guide
157
System Administrator Functions