User Manual

Installation and Setup
Xerox
®
Phaser
®
6510 Color Printer 41
User Guide
4. Reach into the chassis and push the release lever toward the front of the printer. Hold the release
lever in this position and gently pull the Wireless Network Adapter away from the printer.
CAUTION: Do not use force to pull on the Wireless Network Adapter. If the latch is released
properly, the adapter pulls out easily. Pulling on a secured adapter can damage it.
5. To reinstall the Wireless Network Adapter Port Cover, insert the bottom tab into the small slot.
Gently press the port cover against the back of the printer until it latches into place.
6. Place the left-side cover into place, then slide it toward the front of the printer.