User Manual

Installation and Setup
Xerox
®
Phaser
®
6510 Color Printer 35
User Guide
Selecting a Location for the Printer
1. Select a dust-free area with temperatures from 5–32°C (41–90°F), and relative humidity 15–85%.
Note: Sudden temperature fluctuations can affect print quality. Rapid heating of a cold room can
cause condensation inside the printer, directly interfering with image transfer.
2. Place the printer on a level, solid, non-vibrating surface with adequate strength for the weight of the
printer. The printer must be horizontal with all four feet in solid contact with the surface. To find the
weight for your printer configuration, refer to Physical Specifications on page 218. Select a location
with adequate clearance to access supplies and to provide proper ventilation. To find the clearance
requirements for your printer, refer to Clearance Requirements on page 219.
3. After positioning the printer, you are ready to connect it to the power source and computer or
network.
Opening the Output Tray Extension
To provide better support for your prints, open the Output Tray Extension. For printing on longer paper,
to lengthen the Output Tray Extension, pull out the extender until it stops.