User Manual

Installation and Setup
34 Xerox
®
Phaser
®
6510 Color Printer
User Guide
Installation and Setup Overview
Before you print, ensure that your computer and the printer are plugged in, turned on, and connected.
Configure the initial settings of the printer, then install the print driver software and utilities on your
computer.
You can connect to your printer directly from your computer using USB, or connect over a network using
an Ethernet cable or wireless connection. Hardware and cabling requirements vary for the different
connection methods. Routers, network switches, modems, Ethernet cables, and USB cables are not
included with your printer and must be purchased separately. Xerox recommends an Ethernet connection
because it is typically faster than a USB connection, and it provides access to the Embedded Web Server.
Note: If the Software and Documentation disc is not available, you can download the latest print
drivers from www.xerox.com/office/6510drivers.
For reference:
Selecting a Location for the Printer on page 35
Selecting a Connection Method on page 36
Connecting the Printer on page 36
Configuring Network Settings on page 48
Installing the Software on page 52