User Manual

System Administrator Functions
194 Xerox
®
Phaser
®
6510 Color Printer
User Guide
Configuring IP Address Filtering
1. At your computer, open a Web browser. In the address field, type the IP address of the printer, then
press Enter or Return.
2. In the Embedded Web Server, log in as a system administrator. For details, refer to Logging In as
the Administrator on page 186.
3. Click System > Security.
4. Click IP Address Filtering.
5. For IP Address Filtering, to enable an Internet Protocol, click its associated toggle button.
Note: A check mark on the toggle button indicates that the feature is enabled.
6. To add an IP Address:
a. For Allowed IP Address/Subnet Mask, click Add.
b. In the Enter IP Address field, enter the IP address of the host as X.X. X.X, where X is a number
from 0 through 255. For example, 192.168.200.10.
c. In the Enter IP Mask field, enter the last digits of the network mask for the host.
d. Click OK.
7. To remove an allowed IP Address, for the IP Address:
a. Click the Trash icon.
b. At the prompt, click Delete.
8. To edit an allowed IP Address:
a. From the allowed IP Address list, click the IP Address.
b. Edit the information.
c. Click OK.
9. When finished, to save your settings, at IP Address Filtering, click OK.