User Manual

System Administrator Functions
Xerox
®
Phaser
®
6510 Color Printer 163
User Guide
Resetting the Printer
Using Software Resets to restart the printer is faster and wastes fewer consumables than powering the
printer on and off. Restarting the printer can take several minutes, during which time the Embedded
Web Server is not available.
1. At your computer, open a Web browser. In the address field, type the IP address of the printer, then
press Enter or Return.
2. In the Embedded Web Server, click Home > Support > Restart Device.
3. At the prompt, click Restart.
Configuring Alerts
1. At your computer, open a Web browser. In the address field, type the IP address of the printer, then
press Enter or Return.
2. In the Embedded Web Server, log in as a system administrator. For details, refer to Logging In as
the Administrator on page 186.
3. On the Home page, for Supplies, click Details.
4. For Options, click Alerts Setup.
5. To enable alerts, for Enable Alerts, click the toggle button.
Note: A check mark on the toggle button indicates the setting is enabled.
6. To enable or disable an alert, for the alert type, select the appropriate option:
− Click the toggle button.
− Click the alert type and select an option from the list.
7. Click OK.