User Manual

System Administrator Functions
152 Xerox
®
Phaser
®
6510 Color Printer
User Guide
Connecting the Printer
This section includes:
• Connecting to a Wireless Network Using the Embedded Web Server ....................................................... 152
• Connecting to a Wireless Network Using the Control Panel .......................................................................... 153
• Setting Up the Printer for Wireless LAN WPA2 Enterprise ............................................................................. 153
• Configuring Wi-Fi Direct .............................................................................................................................................. 154
• Disabling Wireless Networking ................................................................................................................................. 155
• Assigning the IP Address Manually ......................................................................................................................... 156
• Changing the IP Address Using the Embedded Web Server ......................................................................... 157
Connecting to a Wireless Network Using the Embedded Web Server
When connecting to a wireless network that does not include a WPS-compliant router, set up and
configure the printer manually. Before starting, obtain the router setup and configuration information,
such as name and passphrase. For assistance, contact your system administrator.
Notes:
• To use the Embedded Web Server to set up the printer on a wireless network, connect the
printer to your computer through an Ethernet wired network.
• Wireless networking is available only on printers with the optional Wireless Network Adapter
installed.
To connect to a wireless network manually from the Embedded Web Server:
1. At your computer, open a Web browser. In the address field, type the IP address of the printer, then
press Enter or Return.
Note: If you do not know the IP address for your printer, refer to Finding the IP Address of Your
Printer on page 30.
2. In the Embedded Web Server, log in as a system administrator. For details, refer to Logging In as
the Administrator on page 186.
3. Click Connectivity.
4. For Connections, click Wi-Fi.
5. In the SSID field, enter the network SSID (name).
6. To select the Network Type, from the menu, select Infrastructure or AdHoc.
Note: The Infrastructure network type provides the greatest selection of security options. AdHoc
provides only WEP encryption in most networks.
7. To select Encryption, for Security Settings, select the appropriate security option for your router.
8. To remove the dots in the Passcode fields, select the dots, then press the backspace key.
9. In the Passcode field, enter the network passcode.
10. In the Retype Passcode field, reenter the network passcode.
11. Click OK.