User Manual

Troubleshooting
Xerox
®
Phaser
®
6510 Color Printer 145
User Guide
Symptom Probable Causes Solutions
Condensation inside the printer
causes partial blanks or creased
paper.
Power on the printer and leave it on for at
least one hour to get rid of the condensation.
For assistance, go to the Xerox
®
Support
website at
www.xerox.com/office/6510support.
Vertical blanks appear. The LED lenses are blocked.
Clean the LED lenses. For details, refer to
Cleaning the LED Lenses on page 106.
The printer is worn or damaged.
For assistance, go to the Xerox
®
Support
website at
www.xerox.com/office/6510support.
The toner cartridges are not
Xerox
®
toner cartridges.
Ensure that the toner cartridges meet
specifications and replace if necessary.
White lines or streaks running
through only one color.
Something is blocking the lens
for the affected color.
Clean the lens for the affected color. For
details, refer to Cleaning the LED Lenses on
page 106.
White line or lines running
through all colors.
Paper or debris is dragging the
bottom of the transfer belt.
• Remove the paper or debris from the
printer.
• For assistance, go to the Xerox
®
Support
website at
www.xerox.com/office/6510support.
Slanted printing.
The paper guides in the trays
are not set correctly.
Reset the paper tray guides. For details, refer
to Loading Paper on page 63.