User Manual

Troubleshooting
136 Xerox
®
Phaser
®
6510 Color Printer
User Guide
4. At the back of the printer, open the Tray 2 Door, then remove any paper jammed that is present.
5. Insert Tray 2 into the printer, then push it all the way in.
Note: If the tray is extended for legal-size paper, the tray protrudes when it is inserted into the
printer.
6. If the control panel prompts you, verify the paper size and type on the screen. If you are not
prompted, change the paper settings.
a. At the printer control panel, press Menu.
Note: To navigate through the menu, use the arrow buttons.
b. Navigate to Admin Menu, then press OK.
c. Navigate to Printer Settings, then press OK.
d. To select the paper type, navigate to Paper Type, then press OK.
e. Navigate to the desired tray, then press OK.
f. To select the desired paper setting, press the arrow buttons, then press OK.
g. To return to the Printer Settings menu, press the Left arrow button twice.
h. To select paper size, navigate to Paper Size Settings, then press OK.
i. Navigate to the desired tray, then press OK.
j. To select a paper-size setting, press the arrow buttons, select the setting, then press OK.
k. To return to the Home menu, press the Home button.