User Manual

Maintenance
114 Xerox
®
Phaser
®
6510 Color Printer
User Guide
Adjusting the Voltage Offset
Use Voltage Offset to specify the bias voltage for printing on the selected paper type. If the printed
image is too light, increase the offset for the paper you are using. If the printed image is mottled or
blotchy-looking, decrease the offset for the paper you are using.
To adjust the voltage offset:
1. At the printer control panel, press Menu.
Note: To navigate through the menu, use the arrow buttons.
2. Navigate to Admin Menu, then press OK.
3. Navigate to Image Quality, then press OK.
4. Navigate to Voltage Offset, then press OK.
5. To select the paper type for the adjustment, press the arrow buttons, then press OK.
6. To increase or decrease the amount of offset, press the arrow buttons, then press OK.
7. Repeat this procedure for each paper type you need to adjust.
8. To return the printer to Ready, press Menu.
Adjusting the Fuser
Use Adjust Fuser for optimum print quality across a wide range of paper types. If the toner on a print is
smearing or can be rubbed off the paper, increase the offset for the paper you are using. If the toner is
blistered or mottled, decrease the offset for the paper you are using.
To adjust the fuser:
1. At the printer control panel, press Menu.
Note: To navigate through the menu, use the arrow buttons.
2. Navigate to Admin Menu, then press OK.
3. Navigate to Image Quality, then press OK.
4. Navigate to Fuser Temperature, then press OK.
5. To select the paper type for the adjustment, press the arrow buttons, then press OK.
6. To increase or decrease the amount of offset, press the arrow buttons, then press OK.
7. If necessary, repeat this procedure for other paper types.
8. To return the printer to Ready, press Menu.