User's Manual

Guide to Printing Using Xerox Production Print Services 9-1
9 Job ticket options
This chapter contains the procedures for printing a document
using the XDS and XDS Plus software on a Xerox printing
system from your computer running Windows 95, Windows
98, Windows NT 4.0, Windows 2000, Windows Millennium,
XP, or a Sun workstation that is running Solaris 2.6 or 2.8.
From a Macintosh OS 8.6, 9.x, or OS in Classic Mode when
running XDS. When running XDS Plus, a Macintosh using
OS X Native mode must be used. The Xerox Document
Submission (XDS), the Xerox Document Submission Plus
(XDS Plus) software, the Xerox Custom drivers, and the
DocuSP Web Client provide you with windows you use to
select a document file, to set up the job ticket, and to submit
your print job to the printer.
Setting up a print job
To set up a print job, you specify parameters that define the
appearance and destination of the printed output.
The Setup window enables you to specify the parameters for
the job that you are printing. On the Setup window, job setup
specification tasks may be accessed from icon buttons on the
icon bar, the pull-down menus on the menu bar, and the job
ticket fields that compose the rest of the window.
Printer Limitations window
If the current job ticket contains parameters that are not
available on the selected printer, the Printer Limitations
window will appear. On this window you can assign defaults
to the indicated areas, or cancel the operation. Select [Assign
Defaults] to make changes to the current job ticket, or select
[Cancel the Operation] to cancel. If you cancel, you return to
the startup XDS window and can select a different printer, or
select a new job ticket.