User's Manual

Using Command Line Client
Guide to Printing Using Xerox Production Print Services 6-9
• com.xerox.jxds.frontends.clc.application.JXDS -p/
rebar.ess.c.xerox.com/default -f ./golden.ps -jt ./
ticket.xpf
• com.xerox.jxds.frontends.clc.application.JXDS -p/
rebar.ess.c.xerox.com/rebar -f ./golden.ps -jt ./
ticket.xpf
Refer to “Command syntax: single command mode,” for
further information on the command structure.
Refer to the “Single command mode commands,” earlier in
this chapter, for a list of the available parameters for the Print
command.
Command quick reference
The following tables list all the commands and parameters for
each mode of the XDS Command Line application.
Table 6-1. Print command mode commands and parameters
Parameter Function Arguments Argument definition
–p Set printer <printer> Name of printer
–f Set file to print <file> Name of document file to print
–jt Set job ticket <job> Name of job ticket file
–copies Set number of copies to print <#> Number of copies (numeral)
-sides Set sides to be printed <sides> 1-side, 2-side, head-to-toe
-finishing Sets finishing for job <option> no-finish, staple-top-left,
staple-bottom-left, staple-top-
right, staple-dual-left, staple-
dual-right, bind-left, bind-right,
booklet-maker
-user Identifies the sender’s user
name
<sender> Enter the sender’s user name
–exit Exit XDS Command Line
–help Display list of available
commands
–Listp Display list of printers -v or -V Displays printer name, status,
type, network address, output
type, output format and server
program
-p or -P Displays printer status of
specified printer
-server
<DocuSP
controller
name>
Displays status of specified
Controller.