User's Manual
Printing a job using the DocuSP web interface
4-16 Guide to Printing Using Xerox Production Print Services
NOTE: Any shift that you set using the Image Shift option 
may interfere with any offset for binding that the application 
sets in the document file.
To shift the image on the printed page, follow these steps:
1. From the Image Shift pull-down menu, select one of the 
following image shift options. 
NOTE: These options may be available only if the Sides 
Imaged parameter on the Job Setup tab window is set to 
one of the [2 Sided] options, and the printer supports 
independent side 2 image shift.
• Independent:  Independent vertical or horizontal shift 
for the images on both side 1 and side 2.
• Mirror X:  A horizontal-only shift that moves the 
images on both sides in opposite directions. This 
leaves the vertical shift independent for both sides.
• Mirror Y:  A vertical shift that moves the images on 
both sides in opposite directions. This leaves the 
horizontal shift independent for both sides.
• Mirror X and Y: A horizontal and vertical image shift 
that moves the images on both sides in opposite 
directions from each other. [Mirror both] is best used 
for two-sided jobs.
• Mirror X, Tandem Y: A horizontal shift that moves the 
images on both sides in opposite directions from each 
other, and a vertical shift that moves both of the 
images in the same direction.
• Mirror Y, Tandem X: A vertical shift that moves the 
images on both sides in opposite directions from each 
other, and a horizontal shift that moves both the 
images in the same direction for both sides.
• Tandem X: A horizontal shift that moves the images 
on both sides in the same direction. This leaves the 
vertical shift independent for both sides.
• Tandem Y: A vertical shift that moves the images on 
both sides in the same direction. This leaves the 
horizontal shift independent for both sides. Tandem is 
best used for head-to-toe jobs. 
• Tandem X and Y: A horizontal and vertical shift that 
moves the images on both side 1 and side 2 in the 
same direction.










