User's Manual

Printing a job using the DocuSP web interface
4-10 Guide to Printing Using Xerox Production Print Services
• User Stock: This section displays the name and
properties of a stock that a user defines. You can define
only one user stock per workstation.
Stock properties
Each section displays the following properties for each stock
that it contains:
• Name: The name of the stock.
• Size: Stock size expressed in inches or millimeters,
depending on what was selected on the Preferences
window. (Refer to “Setting user preferences,” later in this
chapter, for information on setting the unit of measure.)
• Color: The color of the stock.
• Type: The type of stock (standard, transparency, etc.)
• Drilled: Indicates whether or not the stock has drilled
holes.
• Weight: The weight of the stock in grams per square
meter (g/m
2
)
• Side 1: Coating or surface on side 1 of the stock (matte,
glossy, satin, etc.)
• Both: Coating or surface on both sides 1 and side 2 of
the stock.
Stock selection buttons
The following buttons are displayed for the user stock entry
and for each printer stock entry in the [Stocks] section.
• Favorites check box: When selected, this check box
indicates that the stock is used frequently, and adds its
name to the Main Paper Stock pull-down menu on the Job
Submission window. (Refer to “Specifying the main stock
for the job,” earlier in this chapter.)
• Selected Stock radio button: Selects the stock for the
job. Selecting this button displays the stock name in the
[Stock used in Job] section. It also displays the stock
name in the Main Paper Stock field on the Job
Submission window.
NOTE: Unless the [Favorites] check box is also selected
for this stock, it does not remain on the Main Paper Stock
menu after another stock is selected, or the Job
Submission window is closed.