User's Manual

Printing a job using the DocuSP web interface
4-8 Guide to Printing Using Xerox Production Print Services
2. In the [Quantity] text box, either enter the number of
copies, or select the arrow buttons until the desired
number of copies is displayed.
Specifying a page range for printing
To specify a range of pages that will be printed, follow these
steps:
1. On the Job Submission window, scroll until the [Quantity]
field is visible.
2. Do one of the following:
• Select the [All] radio button if you want to print all the
pages in the document.
• Select the [From/To] radio button if you want to specify
a range of pages to print. The default range of pages
is 1 - 99999.
In the [From] field, enter the first page number that you
want to print; and in the [To] field, enter the last page
number. The [All] radio button must be deselected
before you can enter numbers in these fields.
NOTE: The value in the [From] field must be less than
or equal to the value in the [To] field.
Specifying the main stock for the job
The main stock is the stock on which most of the job is
printed. Follow these steps to specify a stock that will be used
for all pages in the job that are not programmed to use one of
the other available stocks.
The Main Paper Stock pull-down menu contains all stocks
that have been designated on the stocks window as
Favorites.
Follow these steps to select the main stock for your job:
1. From the Main Paper Stock pull-down menu, select the
stock on which you want to print the job. The properties of
the stock that you select are displayed in the features box
below the menu.
NOTE: Unless you specifically want to print a smaller
image on a larger sheet of paper, or a larger image on a
smaller sheet of paper, ensure that the paper size that is
specified in the application matches the paper size in the
job ticket.