User's Manual

Printing a job using the DocuSP web interface
Guide to Printing Using Xerox Production Print Services 4-5
5. If you selected [Save] or [Print and Save], select the
format in which the job will be saved, from the [Save Job
Format] pull-down menu. The following formats are
available, Fast Reprint and Fast Reprint with Display
Resolution Images.
NOTE: You are not able to reprint saved jobs using the
web interface. You must use XDS or XDS Plus to reprint
the jobs. However, you can select and print saved jobs as
regular print jobs if you have access to the saved job.
Selecting the type of page description language
The [PDL Type] field, located in the section of the Job
Submission window, displays the type of page description
language, or PDL, in which the selected document file was
saved. You can specify a different PDL type for the job by
following these steps:
1. From the PDL Type menu, select the page description
language for your document. The options that are
available depend on the selected printer. Refer to the “Job
ticket features by printer” chapter for information on the
options that each printer supports.
Select the [Printer Default] check box if you want to set
the PDL that was specified at the printer controller.
2. If you select one of the Plain Text options, the following
fields are enabled in the PDL Type field:
• Orientation: Select the font orientation from the pull-
down menu.
• Font Name: Select the font from the pull-down menu.
• Font Size: Enter a number for the font size, or select
the arrow buttons until the desired size is displayed.
Selecting the queue default job ticket
If you want to use the default job ticket parameters that were
specified at the controller for the queue that you selected,
follow these steps:
1. Select the queue and the file to print.
2. Select [Restore Queue Default Ticket]. The following
message is displayed:
Are you sure you want to restore the current settings
to the queue’s default Job Ticket?