Corporation Printer User Guide

40
Chapter 2 Printer Overview
Size Mapping
Size mapping is the process of setting up a table that establishes relationships
between input document sizes and output image sizes. When size mapping is
finished (must be done prior to printing), documents can be enlarged or reduced
automatically based on the table entries.
Media Mapping/Automatic Mapping
Media mapping is the process of setting up a table that establishes relationships
between output image sizes and media sizes. This process, like size mapping,
must be performed prior to printing. Once the media mapping table is finished,
the media size is determined by the entries in the media mapping table.
When Automatic Mapping is selected, the output media size that matches the
output image size will be selected.
Refer to " Size/Media Mapping" in "4.3 Logical Printer Print Settings" for more
details.
Check media mapping to be sure the media size selected matches the media
loaded in the printer. Refer to
"4.3 Logical Printer Print Settings" for more details.
Enlarge
Reduce
Input document size
Output image size
A2
A1
A3
Output document size
Paper
Output on A3 roll media
Output on A2 roll media
Rotated 90 degrees
A3 A3
A3