Corporation Printer User Guide

10
1.4 Power Save Mode
The Power Save Mode automatically lowers the power consumption of the
machine by reducing the fuser power. The machine will enter the power save
mode when no prints or copies have been made for a preset period of time.
• Low power mode 1
This mode reduces the temperature of the fuser, thereby reducing power
consumption. The parameters that can be set up are only [ON] and [OFF],
on the 6030/6050 and the time that must elapse before the mode activates
are:
6030/6050 Copier Printer: 1 to 120 minutes; the default setting is
[5 minutes].
6050A: 15-240 minutes; the default setting is [15 minutes].
• Low power mode 2 (6030/6050 only)
This mode reduces the temperature of the fuser more than Low power
mode 1.
The parameters that can be set up are only [ON] and [OFF] on the 6030/
6050, and the time that must elapse before the mode activates is 5 to 120
minutes; the default setting is [15 minutes].
• Sleep Mode
The sleep mode automatically switches off the power to the printer. The
parameters that can be set up are only [ON] and [OFF] on the 6030/6050,
and the time that must elapse before the mode activates are:
6030/6050 Copier/Printer:15 to 120 minutes; the default setting is [90
minutes].
6050A: 15 to 240 minutes; the default setting is [55 minutes].
Power is restored to normal levels when a print job is received by the printer, and
when the <Power Saver> key on the printer control panel is pressed.
The Power Save Mode settings can be accessed and changed using either the
<Custom Presets/Meter Check> key on the copier control panel, or the setup
menu on the printer control panel.