Corporation Printer User Guide

170
Chapter 4 Logical Printer Setup and Operation (6030/6050 only)
Printing Long Documents
The media cut mode can be set to either the standard A0 format (1,189 mm), the
standard shape increased in length, or the synchronized cut.
This parameter is set up using the logical printer [Output Option] feature.
[AUTO] : The standard shape priority mode. If the length of the document
exceeds the standard size, the paper is cut to the standard shape
that has been increased in length.
[OTHER]: Synchronized cuts performed on all images.
[MIX] : If images that are smaller than the A0 size exceed the standard size,
the paper is cut to the standard size that has been increased in
length. Synchronized cuts are performed on all images that exceed
the A0 size.
[MIX2] : If images that are smaller than the A0 size exceed the standard size,
synchronized cuts are performed on all images.
• Synchronized cutting is when the length of the print is cut to the non-
standard size that matches the length of the image.
• All output is carried out on roll media when [OTHER] has been selected. Cut
sheet cannot be used.
Input image that is longer
that the standard size
Output image
In the case of [AUTO]
Output in a size that
is the standard shape
increased in integers.
In the case of [OTHER]
The same size as the
input image is output.