Corporation Printer User Guide

89
3.8 System Parameter Setup (Print Services on Web, 6030/6050)
2 Select the required paper width for Special A1 and Special A2 paper from
the available selections.
3 Press the [Apply] button to save the new setting, [Cancel] to revert to
the existing setting, or [Reset to default] to return to the factory default
setting.
Setting Up [Job Recovery]
1 Select [Job Recovery] from the [System parameters] menu.
The Job Recovery selections will display in the right pane.
2 Select the option that will determine how jobs that are in the print queue
when the printer power is shut off will be processed when the power is
switched back on. The choices are
[OFF], [Queued], and [All]. The default
setting is [OFF].
3 Press the [Apply] button to save the new setting, [Cancel] to revert to
the existing setting, or [Reset to default] to return to the factory default
setting.
Setting Up [Extension]
1 Select [Extension] from the [System parameters] menu.
The Extension selections will display in the right pane.