User Guide

Maintenance
160 Xerox
®
WorkCentre
®
6027 Multifunction Printer
User Guide
Adjustments and Maintenance Procedures
This section includes:
• Adjusting for the Paper Type ........................................................................................................................................ 160
• Adjusting the Bias Transfer Roller ............................................................................................................................... 161
• Adjusting the Fuser ........................................................................................................................................................... 161
• Color Registration .............................................................................................................................................................. 162
• Refreshing the Bias Transfer Roller ............................................................................................................................ 164
• Adjusting the Altitude ...................................................................................................................................................... 164
• Adjusting the Touchscreen ............................................................................................................................................ 165
Adjusting for the Paper Type
Use Adjust Paper Type to compensate for paper thickness within a paper type. If the printed image is
too light, use a heavier setting for the paper you are using. If the printed image is mottled or
blotchy-looking, decrease the setting for the paper you are using.
To adjust the paper type:
1. At the printer control panel, press the Machine Status button.
2. Touch Tools, then touch Admin Settings.
3. Using the keypad, type the passcode as needed.
4. Touch Service Tools.
5. Touch Adjust Paper Type.
6. Touch Plain or Labels.
7. To select the weight range of the paper, touch Lightweight or Heavyweight.
8. To return to the Services Home menu, press the Services Home button.