User guide

Server Fax
Xerox WorkCentre 5735/5740/5745/5755/5765/5775/5790
Fax
90
Layout Adjustment
The Layout Adjustment options allow you to specify the
original size or mixed size originals for scanning. To access
the Layout Adjustment options, select Services Home and
Server Fax. Then select the Layout Adjustment tab.
Original Size
Select Original Size to enter the size of your document when scanning from the document glass or the
document feeder. Your device uses this information to calculate the size of your original and the
scanned image. You can also select Auto Detect for automatic size detection, or Mixed Size Originals
if scanning a mix of sizes. The options are:
• Auto Detect is the default setting and enables automatic size sensing. The size detected is
matched to a standard size paper.
• Pre-set Scan Areas allows you to define the size of your original from a list of pre-set, standard
document sizes. You can view the list by using the scroll bar.
• Custom Scan Areas is used to enter a specific area for
scanning. Measure the area to be scanned on the
original and enter the X and Y axis measurements into
the fields provided. Only the area specified is scanned.
• Mixed Size Originals allows you scan documents
containing different size pages. The pages must be the
same width, like A4 LEF and A3 SEF (8.5x11” LEF and
11x17” SEF), other combinations are shown on the
screen.
The device will detect the size of the documents and determine whether the receiving fax
machine can support the various paper sizes. If the receiving fax cannot support the page sizes,
the image is reduced or enlarged to fit.
Select Save to save your selections and exit.
Fax Options
The Fax Options allow you to specify a specific time for
sending your fax. To access the Fax Options, select Services
Home and Server Fax. Then select the Fax Options tab.