User guide

Server Fax
Xerox WorkCentre 5735/5740/5745/5755/5765/5775/5790
Fax
85
6. Select the required features for your fax job using the touch screen:
7. Press Start to scan the originals and process the Server Fax job.
Remove the originals from the document feeder or document glass when scanning has completed.
Note: The Server Fax job enters the job list ready for sending.
8. Select Job Status to view the job list and check the status of your job.
Dialing Options
The dialing options enable you to enter the destination fax number or numbers. Select the appropriate
dialing option for your fax job.
To access the Dialing Options, select Services Home and Server Fax.
Manual Dialing
1. Select the fax number field and enter the fax number
required using the numeric keypad.
2. If special characters are required, use the Dialing
Characters option to enter the number plus additional
dialing characters. Refer to Image Quality on page 74
for further information.
3. Select Add to add the number to the Recipient list.
Enter additional numbers as required.
The fax will be sent to all the numbers in the Recipient list.
Dialing Characters are alphanumeric characters which have a specific fax function and can be
entered as part of the fax number.
2-Sided Scanning is used to select whether your originals are 1-sided or 2-sided.
Original Type is used to define the original document as text, text and photo, or photo.
Resolution can be used to optimize the resolution settings.