User guide

Job Assembly
Xerox WorkCentre 5735/5740/5745/5755/5765/5775/5790
Workflow Scanning
126
Job Assembly
This tab provides access to the Build Job feature for
compiling jobs which have different originals or programing
requirements within a job. To access the Job Assembly
options, select Services Home and Workflow Scanning.
Then select the Job Assembly tab.
Build Job
Use this feature to build a job that requires
different settings for each page, or a segment of
pages.
You can select the appropriate settings to be
applied to individual pages or segments of a
completed job. First split the originals into
sections for individual programing.
1. Select Build Job on the Job Assembly tab.
2. Switch on Build Job by selecting the On button and
select Save.
3. Select the options required for the first segment of the
job.
4. Load the first segment originals and press Start.
5. Remove the first segment originals. The Build Job
screen displays the first segment in the list.
Delete All Segments deletes the current Build Job and
returns you to the main Build Job screen.
6. Select the options required for the second segment.
7. Load the second segment originals and press Start.
8. Repeat these steps until all segments of your job have been programmed and scanned.
9. After the last segment has been scanned, select End Build Job to indicate you have finished
scanning and the job can be processed and completed.
Some pages
with text and
some with
photos
Some pages
2 sided and
some 1 sided
Various
sized
originals
More than
100 pages