User guide

General Care
Xerox WorkCentre 5735/5740/5745/5755/5765/5775/5790
General Care and Troubleshooting
277
Staple Cartridges and Hole Punch Waste
If your device is equipped with a finisher, or a convenience stapler, you will be required to replace the
staple cartridge or cartridges when the device displays a message instructing you to do so. If your
finisher has the optional hole punch unit, you will also be required to empty the hole punch waste
container when prompted by the device.
The staple cartridge for the Basic Office Finisher contains 3000 staples. The Advanced Office Finisher
and High Volume Finisher staple cartridges hold 5000 staples each. The High Volume Finisher with
Booklet Maker has 2 additional staple cartridges located within the Booklet Maker, each of these
cartridges holds 2000 staples. To replace a staple cartridge, follow the instructions provided with the
new staple cartridge.
The hole punch waste container is a catch tray that collects the waste punched paper. Your device will
prompt you when the hole punch waste container needs emptying.
1. Open the finisher door and locate the hole punch waste
container.
2. Slide the hole punch waste container out of the finisher.
Dispose of the waste punched paper in the waste bin.
3. Install the emptied hole punch waste container, ensuring
that the container is inserted correctly.
Cleaning the Device
WARNING: When cleaning the device do NOT use organic or strong chemical solvents or aerosol
cleaners. Do NOT pour fluids directly onto any area. Use supplies and cleaning materials only as
directed in this documentation. Keep all cleaning materials out of the reach of children.
WARNING: Do not use pressurized air-spray cleaning aids on or in this equipment. Some
pressurized air-spray containers contain explosive mixtures and are not suitable for use in
electrical applications. Use of such cleaners can result in a risk of explosion and fire.