User guide

Paper/Output

Xerox WorkCentre 5735/5740/5745/5755/5765/5775/5790

147

Advanced Paper Selection

Select this option to display the Advanced Paper Selection screen. If

there is a bi-directional connection to the printer, the media loaded

in each of the trays is shown.

Select the paper tray, size, color and type to use for printing.

If Pre-Cut Tab is selected as the paper type, the image will be

shifted 13mm (0.5”) to the right automatically. Ensure the correct

tab sequence and number of tabs are loaded for the job.

Note: For information about loading different media, refer to Media Types on page 225 of Paper

and Media.

Transparency Separators

Select this option to display the Transparency Separators screen. If

this option is selected, a blank or printed sheet is placed after each

transparency. The paper type for your job must be set to

Transparency using the Other Type menu option.

• Select Blank Separators or Printed Separators using the

Separator Options drop-down menu.

• Select the Separator Color.

2-Sided Printing

You can have your job automatically printed on both sides of a sheet of paper.

• 1-Sided Print prints on one side of the paper or transparency. Use this option when printing on

transparencies, envelopes, or labels.

• 2-Sided Print prints on both sides of a sheet of paper. The images are printed so the job can be

bound on the long edge of the sheet.

• 2-Sided Print, Flip on Short Edge prints on both sides of a sheet of paper. The images are printed

so the job can be bound on the short edge of the sheet.

Note: Some media types, sizes, and weights cannot be automatically printed on both sides. Refer

to www.xerox.com for specifications information.