User guide
3 Copy
58
1.
Select [Book Copying] on the
[Layout Adjustment] screen.
2.
Select the required options.
3.
Select [Save].
NOTE: The facing pages of a bound document must be placed in a horizontal
orientation on the document glass.
Off
Disables the feature.
Left Page then Right
Copies pages of an open book in the direction from left to right.
• Both Pages - Copies both the left and right pages.
• Left Page Only - Copies the left pages only.
• Right Page Only - Copies the right pages only.
Binding Edge Erase
Erases printing of the center binding area of the book that tends to be shadowed due
to the fold in the pages. Use the scroll buttons to specify the area to be erased from the
center of an open book within the range of 0-50 mm (0.0-2.0 inches) in 1 mm (0.04 inch)
increments.
2 Sided Book Copying
This feature allows you to make double-sided copies in the same order and image
layout as the original bound document, using the document glass. A blank sheet is
automatically inserted as the first page.
1.
Select [2 Sided Book Copying]
on the [Layout Adjustment]
screen.
2.
Select the required options.
3.
Select [Save].
NOTE: This feature and the [Book Copying] or [Build Job] feature cannot be activated
simultaneously.
Off
Disables the feature.
Left Page then Right
Copies both pages of an open book in the direction from left to right.
Start & End Pages
Displays the [Starting & Ending Pages] screen where you can specify the start page
and the end page for copying. The page sides must be specified using the bound
original.