User guide

3 Copy

Original Type

This feature allows you to copy at optimum image quality by selecting the type of the

original documents.

Select [Original Type] on the

[Image Quality] screen.

Select the required option.

Select [Save].

Text

Select this option to copy documents that contain text only, where the text must be

copied crisply.

Photo & Text

Select this option to copy documents that contain both text and photographs. Text and

photographs are automatically distinguished, and an appropriate quality mode is

selected for individual areas.

Photo

Select this option to copy documents that contain photographs only.

Light Text

Select this option to copy documents that contain faint text, such as that written in

pencil.

Text on See-Through Paper

Select this option to copy documents that use see-through paper.

NOTE: [Text on See-Through Paper] is available only when [System Settings] > [Copy

Service Settings] > [Copy Control] > [Original Type - See-Through Paper] is enabled.

Image Options

This feature allows you to adjust the brightness and sharpness levels for copying

documents.

Select [Image Options] on the

[Image Quality] screen.

Select the required levels.

Select [Save].

Lighten/Darken

Allows you to adjust the copy density using seven levels between [Lighten] and

[Darken]. The copy density increases the nearer the level is to [Darken], and decreases

the nearer the level is to [Lighten].

Sharpness

Allows you to adjust the copy sharpness using five levels between [Sharpen] and

[Soften]. The sharpness of contours increases the nearer the level is to [Sharpen], and

decreases the nearer the level is to [Soften].