User guide

3 Copy

screen, and allows you to select a paper size. The presets are set up by the System

Administrator.

• Custom Size - Allows you to specify the width and length of the paper size using the

scroll buttons in 1 mm (0.1 inch) increments. The acceptable ranges of paper sizes

are 89-297 mm (3.5-11.7 inches) for the width and 99-432 mm (3.9-17.0 inches) for

the length.

Paper Type

Displays the preset paper types on the touch screen, and allows you to select the paper

type. The presets are set up by the System Administrator. The setting is only temporary

and applies only to the current copy job.

2 Sided Copying

This feature allows you to automatically make single or double-sided copies from single

or double-sided documents.

NOTE: Before using the feature, specify the document orientation to indicate the top

of the document in [Original Orientation] on the [Layout Adjustment] screen.

NOTE: The 2 Sided Copying option cannot be used with the following paper types:

Transparency, Lightweight, Heavyweight, Labels, Bond, as well as paper already

printed on one side.

Select a preset button or [More]

for the [2 Sided Copying]

feature on the [Copy] screen.

Displays the [2 Sided Copying] screen. For more information, refer to

[2 Sided Copying]

Screen on page 52

[2 Sided Copying] Screen

Allows you to select the 2 sided copying options, document feed direction, and original

orientation.

NOTE: When using the document

glass for [1 J 2 Sided] or [2 J 2

Sided], the machine will display a

message when it is ready to scan

the next document.

1 J 1 Sided

Makes single-sided copies from single-sided documents.

1 J 2 Sided

Makes double-sided copies from single-sided documents.